Kore - G2 Buckle Garrison belt - Black

Kore Reinforced range belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.

Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.

• Belt Width / Thickness: 1.5” / 5mm
• Load Rating: Up to 10 lbs. / IWB, OWB or Appendix
• Size Range: Fits  24" - 54"
• Buckle Material/ Finish: Zinc Alloy / Powder-Coat
• Buckle Size / Weight: 3.5” x 1.75” / 5 oz.
• Adjustable Track: Provides over 40 - ¼” size positions
• Belt Reinforcement: Power-Core™ Center for Added Stiffness and Support; Virtually Indestructible
• Belt Material: Nylon / Super Fiber Inner
• Belt Keeper: Included

To trim your 1.5" Gun Belt or 1.75" Garrison Gun Belt to size, follow the instructions below.

1. On the back of the belt, use the ruler markings to find your pant size.

2. Add 4 inches for OWB carry, or 6 inches for IWB carry to your pant size. Cut on the mark using a sharp pair of scissors.

For Example: If your pant size is 34" - cut the belt at the 38" mark for OWB carry, or 40" for IWB carry.

If your pant size is close to the maximum size marking DO NOT CUT. Try the belt on first, then trim accordingly.

3. Loosen the 2 set screws on the back of the buckle with included wrench. Insert the cut end of the belt into the receptacle with teeth.

4. Clamp teeth down firmly and gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped. DO NOT TIGHTEN SET SCREWS UNTIL THE TEETH ARE FULLY CLAMPED DOWN.

5. Feed belt around waist (L to R), through the buckle and click until snug.

The tip of the belt should extend  around 3 inches beyond your first belt loop.