CZ - Hammer CZ 75/85/SP-01/TS SA/DA Competition

CZ - Hammer CZ 75/85/SP-01/TS SA/DA COMPETITION

The wide tuned hammer for the pistol CZ 75 with the standard double action system. It is necessary to widen the groove in the breech at the spot, where the hammer hits the firing pin at pistols CZ 75 SP-01, CZ 75, CZ 85, CZ 97 with blocking of the firing pin. Due to the lower depth of the cog it is necessary also to adjust the safety so that it works (the catch of the hammer to be adjusted).

Compatible with CZ 75, CZ 85, CZ 75 SP-01, CZ 75 SP-01 Shadow, CZ Shadow 2, CZ 75 Tactical Sports, CZ 97, CZ 75 TS Czechmate, CZ 75 COMPACT

Compatible with pistols without block - Shadow 2 / TS / TS2

 For TS a TS2 it´s only SA

1091-1320 sammar artikel hade innan 1091-1154

This hammer will fit most models DA / SA CZ Pistols, such as CZ 75B, CZ 75 SP-01, CZ SHADOW 2. 

Also used for SA only guns. When used with SA only guns, do NOT use the DA parts. 

Greatly reduces sear creep, lightens and smooths the single action trigger. Use in conjunction with light main spring (13lb) for smoother lighter DA trigger pull.

We recommend using the competent gunsmith's help for fitting the hammer.

The safety or sear may need to be fitted after installation of the hammer.

LEGAL for "Production".

Hammer width: 6,0mm

Material: Steel

OEM number: 1091-1320 (replacement for the old number 1091-1154)

Note on Hammer Width:

- Standard CZ 75 slide hammer notch width of 0.28" (7,15 mm) and hammer width of 0.234" (6,0 mm).

- CZ 75 SP01 Shadow, Tactical Sport, CZ 75 Shadow slide hammer notch width of 0.355" (9,0 mm) and hammer width of 0.315" (8,0 mm).

Check your slide notch width before ordering!

cz art nr. 0420-0200-02nd