{"product_id":"daa-2-in-1-seating-and-crimping-die","title":"DAA - 2-in-1 Seating and crimping die","description":"\u003cp\u003eWe sell a lot of\u003cspan\u003e \u003c\/span\u003eBullet Feeders. And the most common request we hear is “Can I used the Bullet Feeder on my 550?” Or “can I use the Bullet Feeder and still continue to use my powder check on my 650?”.\u003c\/p\u003e\u003cp\u003eThe answer to both questions is, YES, provided you combine your Seating and Crimping operations into one station, to free up the station your Bullet Feeder will need.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSuch Seating and Crimping dies are available, and so we decided it was timer we made them directly available to our customers as well. We teamed up with one of the best Die manufacturers, LEE Precision, and are now pleased to offer you our DAA 2-in-1 Seating and crimping dies.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThese quality stainless steel dies, enable you to Seat and Crimp in one station, without compromising the quality of your ammo. It may take a little longer to get the adjustments just right, but once calibrated correctly, this die will produce consistent and precise quality ammunition.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThese dies include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet Seater, are heat treated to ideal hardness and polished to the smoothest finish.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDAA 2-in-1 Seating \u0026amp; Crimping die – Set up Instructions\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eThank you for choosing this DAA 2-in-1 Seating \u0026amp; Crimping die. This die frees up a station in your progressive-press tool head, making space for a bullet dropper die on your 550, or, allows you to use a bullet dropper along side a powder-check on your 650 or 1050.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFollow these steps to adjust the Die:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePosition a well-sized and belled case in the appropriate station and run the tool head all the way down (or shell plate all the way up)\u003c\/li\u003e\n\u003cli\u003eWith the adjustment knob and lock ring on the die adjusted as high as they will go turn the die into the tool head until it stops, when the top of the case makes contact with the crimp shoulder.\u003c\/li\u003e\n\u003cli\u003eSet the lock ring by turning it down until it locks against the top of the toolhead.\u003c\/li\u003e\n\u003cli\u003eTurn the adjustment knob 2 full turns down, then lower the shell plate and place a bullet onto the case.\u003c\/li\u003e\n\u003cli\u003eKeep turning the adjustment knob down, and test the length of the bullet until you get the overall length you are aiming for.\u003c\/li\u003e\n\u003cli\u003eOnce the correct length is reached, lower the shell plate, and loosen the lock ring. Then, turn the die down another half turn to create an adequate crimp, and retighten the lock ring. Then turn the adjustment knob about 2 turns out.\u003c\/li\u003e\n\u003cli\u003eRaise the shell plate again and bring the bullet back into the die, then turn the adjustment knob down until it makes contact with the top of the bullet.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNow the die is properly set for both depth and crimp, which occur at the same time at the top of the stroke.\u003c\/p\u003e","brand":"DAA","offers":[{"title":"9\/38\/357","offer_id":52869891129680,"sku":"101922","price":349.0,"currency_code":"SEK","in_stock":true},{"title":"40S\u0026W","offer_id":52869891162448,"sku":"101923","price":349.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7893\/7168\/files\/5f15685001c64.jpg?v=1775601913","url":"https:\/\/store.rangemaster.se\/products\/daa-2-in-1-seating-and-crimping-die","provider":"RangeMaster Store","version":"1.0","type":"link"}